Wednesday, August 22, 2012

A Bustle Project Not Yet Shared...

Spring/early summer I finally got around to sewing an 1870s bustle project.  I haven't posted about it yet but I've worn it to two events, adding to the skirt and tailoring for a better fit for the second event.  Here are some photos and I'll share the process soon....



Above was the first outing.  Note how the waist looks different than the pictures below.  The weight of the bustled material pulled the back away from my body because I did not have the fit as snug as it needed to be.  I also then added another row of pleating at the bottom (see below).

Below you can see the better fit around the waist and back.  With the more correct tailoring I was able to achieve the more accurate curve between bustle and back.


I still am learning how to get a good fit in the shoulders/bosom area.   I was able to get the top fitted semi-well, especially considering I was struggling with keeping lines as matched as possible.  However there is still a bit of gap when I sit in the front shoulder upper bust area.  I also messed up by not putting a dust ruffle on and damaged the fabric underneath in some areas.  Hopefully the fray issue will not be too bad and I will go back and add that before I wear this outside again.


 



 









































































"oh my Sir.....you ARE being cheeky...."


This costume grew from plaid material that I had in my fabric stash for years.  I purchased 10 yards of textured lightweight upholstery silk from Ebay back when you really could get amazing deals and people didn't have their primary business online.  I think the whole thing cost $30 plus another $10 for shipping...how could I go wrong.  I then set it aside waiting for a "perfect" project but really more afraid of having to match plaid material was the reason nothing ever came of it.  The years past and my sewing skills improved and I decided to give this a go.  The pattern, another amazing Truly Victorian pattern was really quite simple.  Getting everything to line up was not.  There was a lot of fiddling and faddling to get things lined up, and given some of the extreme curvature on the bodice, some lines were just not going to line up.  In the end the sleeves went together well with the bodice and even the bustle has good connections with the front of the polonaise.  I worked yards and yards of trim -- pinning and folding while watching Netflix.  On a side note, I seem to go through a lot of streaming when I sew...I should start tracking what it is I watch when I sew....lol.

Below are construction photos.  Even with a very accurate form I had to make the corrections the second time I wore the outfit (as discussed above).  The Victorian bodice draping class offered by the GBACG has also been a great tool in creating these outfits....and for this project it was no different.


Getting the darts to fit my figured meant diverging from the pattern's directions and darts.  They were a good starting point but I had to do a lot of adjusting to make this work.

I was able to get a decent pattern flow of the plaid, but it some places (back) it wasn't going to match no matter what because of the extreme curvature of the pattern (and body).


Here is another view of the back (excuse the peplum not being smoothed out) where you can see that the matching success ended with the back....

Here is the polonaise before the bustle was stitched to the tapes and the tight fit of the bodice achieved. Also before the skirt was embellished.


Yards and yards of pleated trim.  The underskirt and the trim were made of inexpensive acetate taffeta as there was no budget for anything else.  I used a serger to bind one edge which made it easier to deal with.  On the skirt I used an old technique on the underside of the pleats to baste them down so they don't get messy (lots and lots of handwork).

The green fancy gimp was a closeout at Jo-Anne's.  Clearanced out for .50 a yard from 5.99....got to love that!!!  And there was just enough for this project.

The trim is a bit bulky at the closure but I used a brooch to keep the ends together.  Not idea but as this is a costume it was good enough.  Side note:  the buttons were a score at the discount fabric store.  $1 for shell buttons with a cast that complimented the light fabric.




Wednesday, August 15, 2012

1000+ Views

08/15/12 
Woke up this morning and went to update this page and found that I had 1001 views.  Wow!  I know it doesn't really mean anything, no prizes or gold stars but it tickled me to know that people look...thanks everyone for peeking at the frippery...now back to sewing.

Tuesday, July 31, 2012

The Evil Yellow Day Dress Project

I sew to occupy  vast hours of unoccupied time.  Before you jump to the conclusion that I sit around eating bonbons all day and keeping myself fit at the gym, understand that I work a full time job, parent, and try to keep a 112 year old house from tipping over....that said I enjoy creating and sewing is a healthy outlet.  However this project is a total pain in my behind.  I'd like to be clear that it has NOTHING to do with the pattern.  The pattern, a Truly Victorian is wonderful, like all their patterns are.  I am just not enamored with this time period and felt it was time to add a sheer dress to the costume closet for the summer months when picnic events occur.

I found the fabric a semi sheer cotton poly blend for $2 a yard.  It is hard to go wrong at that price.  I over bought thinking I was going to cartridge pleat a spectacularly full skirt then decided that was terribly silly, for no other reason that I didn't want a particularly full skirt.

I posted to the guild yahoo group a question regarding hoop circumference and a lively discussion ensued.  I am pleased with my old ebay bought hoop, although  after several years of owning it I finally decided to trim the bottom net. The impromptu surgery was successful.  Additionally, for some unknown reason this project has been slow and tedious and has resulted in very injured fingertips.  I am not sure how I was able to keep my repeatedly injured fingers off the fabric but I  was constantly bleeding from a needle or pin jab -- ewww!

I was thankful for a discussion with another costumer in regards to draping a petticoat that was fitted rather than pleated or gathered, I believe that this cut down a great deal on the bulk of the skirt at the waist.

I also raided another blog, Reconstructing History (fabulous!)  for a formula on how to decide how much yardage for cartridge pleating.  I wasn't looking to do that kind of pleating but did need some sort of mathematical formula, which in the end I worked backwards from because I knew how many yards, I just needed the spacing between pleated gathers.  Here is the QUOTED INFORMATION from the site.  All credit goes to the owners of the site/blog:
**********************************************************
The Formula
How do you know how much fabric you need for a cartridge pleated garment? The magical formula follows. A little experimentation on your part is necessary.
  1. Decide on your pleat depth. Make up a small sample of your chosen fabric, pleating 6 to 12 inches. Draw up the gathering threads tightly and count the number of pleats in one inch of pleated fabric. Remember this number.
  2. Multiply your pleat depth by 2. This is how much fabric is needed for one pleat.
  3. Multiply this number by the number of pleats per inch.
  4. Multiply this number by the measurement of whichever body part the garment is going to go around (waist, neck, etc.).
  5. Divide this number by 36. You will now have the number of yards of fabric necessary to create a perfectly fitted, pleated garment.
To summarize: ([(pleat depth X 2) X pleats per inch] X measurement) ÷ 36 = fabric yardage
An example: I want to make a ruff with a pleat depth of 2 inches and my neck measurement is 13 inches. With cotton muslin, there are 5 pleats to the inch.
2 X 2 = 4 X 5 = 20 X 13 = 260 ÷ 36 = 7.22 or 7 1/4 yards of fabric.
************************************************************
Now what I did to try to get a number to get an even spacing was to work backwards.  All that math I poo-pooed in school really has come in handy!  I started with the end number of 4 yards of fabric (since I did not want an overly poofy skirt).  I then worked the mathematical formula to work out the number of pleats per inch for my end waist measurement.  In the end the n = 4 allowed me to figure the spacing.  Have a I lost you now?  Just don't think about it too much and go to the photos...

Here are some photos and I will return to add explanations:
TV447 - I highly recommend their patterns!

I used some dummy credit card that came in the mail to make an easy measure on where to put my dots (water soluble marker).  Having a simple shim to measure the spacing out saved a significant amount of time.





Although this is a cartridge pleating technique, I was really going for far fewer folds per linear inch.  I did thread two needles and spaced the top gather from the bottom gather aprox 1/2".

I used pins to keep the pleats in place once I had them where I wanted them.
Although they were held in by the two levels of threads they would move easily.  Pinning them allowed me to then baste the back of each pleat to the next (next picture) on the inside of the skirt.  This technique I found on antique clothing and helped keep the pleats very nicely in place.





The hardest thing was to get the first horizontal pleat in.  Once that was done I used the credit card template to space the rest.  I stopped to sew each one after it was pinned rather than sew them all at one time.  This way I was sure I was getting a nice spacing and didn't over-sew and not leave a hem allowance.


I used the left over piece of dummy credit card to make a spacer for my horizontal skirt pleats.
I didn't really didn't put a lot of effort into measuring the length carefully but rather used the fabric selvages top and bottom and figured I'd muddle through as many pleats as I had space for and still be able to get a hem.  I didn't do an authentic hem which would have been much deeper but it worked for me and I was able to get five horizontal pleats. 
.


Here is the underbodice.  Two issues I have with most patterns is the fact that I'm short-waisted and that with the corset my bust to waist ration usually requires the finagling of extra darts, gussets, seams or other measures to get a fit in the bust.  Here I had to add the extra seam, no other messing with the existing darts and seams was going to make this work.  I also decided not to pipe the shoulder opening but I did take up the easy with needle and thread then use a very thin bias tape to finish the edge.  Again more hand sewing that I really wanted to do but I don't want to machine finish the edge.


Although not historically correct, I added a white cotton crochet-like trim to the inside neckline of the inner bodice.  I hand stitched the whole darn thing on because I didn't want a machine stitch to show.  Only when I was half way done did I think to myself that nobody would see the machine stitching because this was going to be on the inside! Duh!! Sigh.  Sometimes I over think and other times I don't think at all.  Note to self:  when sewing late at night take an extra minute or two not to be so dull witted.
*********************

Next I am working on the bishop sleeves.  I'm just so unmotivated with this project.  It really is an easy pattern but I'm moving so slowly because it just isn't my usual time period of interest.  In the spirit of making things harder I am adding horizontal pleats to the sleeves.  Unlike the skirt I am not "winging" it this time.  I sketched out (to scale) a number of different widths and settled on a 3/8 pleat with a 1/2 spacing.  I'm also only doing three pleats at the upper arm.  Again to make it harder I'm first going to sew the sleeve then sew the pleats so that the pleats do not stop at a seam.  Details details details....

Here is the plan, lets see how it works:  1) make up a piece of paper with the correct measurement to add the necessary length to the sleeve.  2)  slash the pattern and add paper.  3) mark sleeve prior to sewing 4) sew sleeve with french seams 5) sew horizontal pleats 6) sew cuff.  Simple right?

08/09 -- well the answer to that is WRONG! Evil yellow sleeves...lol!   Actually it wasn't so bad except that I had to rip out all the hand sewing on one cuff because I was again sewing without paying attention.  Now the part of the above steps that I did change was #4 and #5.  I decided it would be easier to sew the pleats but not all the way THEN do the french seams.  Below is the photo of the sleeve before I put it together as a tube.  This really was an easy way to do this, and unlike the skirt I first pinned everything then sewed it all, rather than working one pleat at a time.  The discolouration in the photo is from where I sprayed water to get rid of the blue water soluble ink:


Once I joined the long seem (in a french seam to make it clean) I then went back to the machine and stitched the remaining few inches of pleats.  Super easy.  I do recommend having a good sewing "ham" and other tailor tools to get a nice pressing:


I will post the sleeves eventually but now the question is whether I run pleats across the front of the top of the dress.  Here is an example:

I'm just not sure what to do because if I run the pleats then it may look too busy by competing with the pretty scooped lining which I edged with cotton crochet like lace.  I think I'll have to mull this one over... 

08/15 This project should have been done by now but it isn't.  I've gotten very excited about several other projects but this one...bla...

That said the answer to the bodice question is "no pleats."  I decided not to mess with the pretty neckline of the under bodice.  I finished the sleeves using the machine this time to attach the pretty crochet like lace to the undersleeve.   Took no time at all unlike the bodice where I hand stitched everything.  Now to get the button holes in and attach buttons.  I found tiny pretty plastic buttons for the underbodice and shell buttons (white with a tinge of yellow) for the outerbodice -- sometimes having a button stash can be a good thing.

Only regret is that I did not lengthen the sleeve more and add two more pleats.

Well, I'm done except for a couple hooks and eyes.....totally uninspired....lol...but its done before the picnic which is good.....now I will have to try this on and figure out how to hide my beautiful corset from showing through all the sheer material.

This is NOT how the pattern was intended to be.  The sleeves were supposed to be worked together, however with the fiddling I had to do to get the bust to fit I changed the neckline in such a way that the shoulder seems no longer matched.  Not ideal since now the underbodice shoulder seem is not lined up and you can see this through the sheer sleeve material.  Lesson learned for next time (if there is a next time).







Friday, June 29, 2012


4th of July Sashes with Cockades:

Our local neighborhood has a old-timey 4th of July parade.  A mixed bag of costumers is getting together to walk in various costumes.  We have watched the parade in the past but not participated, this year we are walking.  To add to the "Rose, White, and Blue" theme (as this is the Rosegarden District) I am making sashes with cockades.  These are made of cotton quilting fabrics that are seasonal and a left over fabric stash fabric.

The brilliant thing about this is that I have discovered an excellent tool -- my orthopedic back roll, you know, the three foot or so long Styrofoam roll that you stretch your back over.  Turns out it is great for making cockades and it is tall so you can sit with it between your legs on a stool and not have to slouch or kick back on the couch and have a good work surface at an angle....love it!






Unfortunately my petticoat showed.....
 

Wednesday, June 20, 2012

Victorian "Calling Cards" - a Networking Solution:

As I started to network with other costumers I was handed Victorian-like personal contact cards.  These really were not business cards but rather "contact" cards to facilitate connections through blogs, emails and of course Facebook.  Wearing costumes does not always allow for a concealed cell phone let alone a pad and paper.  These cards discreetly tucked away can be left with others to share contact information.

I thought about buying pre-made cards online.  You know, the "free cards" just pay shipping....then decided to venture out on my own.  I own a simple printer, have rotting scrapbooking equipment (think small paper cutter), free clip art is abundant, I know how to navigate Publisher, and Michael's had a sale on cardstock.  With my $2 worth  of cardstock and a couple false graphic starts I produced:


Of course here was a learning curve with this.  My no-frills printer apparently doesn't do a great job on pearly paper. I had much better luck printing on the matte sides of the mauve and ivory textured paper.


These papers had a pearly textured finish which is now the back of the cards.  This worked out ok.


This paper had a lovely printed matte side and a pearly ivory finish which I printed on.  My printer did not like the pearl finish but I do like the design on the back.  I kept it simple, my name and the name of my Facebook page.  So now I'm connected -- 19th Century style!

Tuesday, April 17, 2012

Last Dinner on the Titanic GBACG -- Oh What a Party!

The Guild has again provided and amazing opportunity to live for a few moments in another era.  It was a truly magical evening.  At 9:20 we had a moment of silence and a toast to those who departed on the ill fated voyage.

Below are photos of the completed dress on the form then on me, and a few photos of others. The sepia toned one was by a photographer provided by the event and my wonderful friend John who decided to escort me so I wouldn't have to do the event "doe" (as opposed to "stag"). The project although not quite what I had envisioned was pleasing.  Footnotes are that I need to cut down the top of the corset by at least a half inch in front but for now it will stay.  Before I put the dress away I will also need to clean the train (thank goodness it is poly given how many times it was stepped on) and finish some beading repair that I didn't have time to do. 















Wednesday, April 11, 2012

Test Run of the Dress

GBACG Last Dinner on the Titanic Event...two days away:  I think I say this every time...only a few days before the event and I'm still sewing.  No matter how early I start, no matter how I promise myself that this will never happen again...it does.  I'm annoyed.  I'm also not particularly happy with the project.  The over-skirt is too short, the side opening which was not initially planned needs to be closed up a bit, the lower skirt is too wide and the whole skirt portion of the dress should have been more fitted.  72 hours before the party there is no fixing the big issues.

There has been considerably more hand sewing than I imagined there would be.  The beading repair has also taken me twice as long as expected.  I have a new respect for the poor girls in the sweatshops turning out couture bead work.  I also had gained so much weight this winter that the dress hardly fit.  I have back cleavage, which some corset aficionados find rather sexy....I however, do not.  I've been on a serious diet the last week to see if I can deflate a bit and get back to my pre winter-bear weight.  Here are some photos of the unfinished dress in a test run.  I chopped parts of me off because, frankly it was a bad hair, no makeup day and I just wasn't in the mood for sharing....